SPC flooring, LVT flooring SPC wall panels Supplier

Luxury vinyl flooring (LVT) offers the perfect combination of aesthetics, durability, and ease of installation. It replicates the look of natural timber, ceramic, or stone while surpassing hardwood in elasticity, impact resistance, wear resistance, and waterproofing.


Product	LVT Flooring / Luxury Vinyl Plank/ Luxury Vinyl Flooring
Thickness	1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm ,4.0mm,5.0mm
Wear layer	0.07mm, 0.1mm, 0.15mm, 0.2mm,0.3mm,0.5mm,0.7mm
Features	Waterproof, Fireproof, Sound proof, Wear resistant
Useage	Bedroom, Kitchen, Landry, Hospital, Mall, School, etc
Dry back lvt flooring size	Inch	mm
	6”36”	152.4*914.4mm
	6”48”	152.4*1219.2mm
	7”48”	177.8*1219.2mm
	9”48”	228.6*1219.2mm
Herringbone size	4.7”24”	120*610mm
Herringbone size	3”12”	76.2*304.8mm
Fishbone size	4.5”22.5”	114.3*571.5mm
Surface texture	Stone Grain Wood Grain

SEND PATTERN OR SAMPLES OF PRODUCTS TO US FOR CUSTOM PRODUCTION

Test item(s)	Test method(s)	Test condition	Requirement(s)(ASTM F1700-13a)	Test result(s)
Length	ASTM F2055-10	Specimen: 914mm×152mm, 5pcs Condition: 23±1 ℃ , 50±5%RH, 24h	914.4mm±1.2mm	Average:914mmDeviation from nominal size: -0.4mm
Width			152.4mm±0.2mm	Average: 2.94mm Deviation from nominal size:-0.18mm~+0.04mm
Squareness			≤ 0.25mm	Deviation range:0.00mm~+0.10mm
Thickness	ASTM F386-11	Specimen: 152mm×152mm, 5pcs Condition:23±1 ℃ , 50±5%RH, 24h	3.0mm±0.13mm	Average: 2.94mm Deviation from nominal size: -0.18mm~+0.04mm
Thickness of wear layer	ASTM F410-08(2013)	Specimen: 13mm×50mm, 5pcs Condition: 23±2℃ , 50±5%RH,24h	Commercial, Min 0.5mm	Average: 0.315mm Maximum: 0.356mm Minimum: 0.286mm
Residual indentation	ASTM F1914-07(2011)	Specimen: 51mm×51mm, 3pcs Diameter of indenter:4.521±0.0127mm Condition: 23±2℃ , 50±5%RH,24h → 140±1lb, 10min→Recovery time: 60min	Average value:≤ 8% Maximum value:10%	Average: 2.7% Maximum: 2.7% Minimum: 2.7%
Flexibility	ASTM F137-08(2013)	Specimen: Length direction,250mm×50mm, 3pcs, Condition: 23±2℃ , 50±5%RH,24h The test piece is bent through 180º within 3s-5s around a mandrel under specified conditions.	Test using a 25.4mm mandrel, no cracks or breaks	When tested with a 25.4mm mandrel: Length direction, no cracks and breaks shown
Dimensional stability (see note 2)	ASTM F2199-09(2014)	Specimen: 240mm×152mm, 3pcs Condition: 23±2℃ , 50±5%RH, 24h →82±2℃ , 360min→23±2℃ , 50±5%RH, 24h	≤0.51mm/305mm (≤ 0.17%)	Length Direction:-0.10% Width Direction:-0.07%
Resistance to chemicals	ASTM F925-13	Specimen: 914mm×152mm, 1pcs Condition:23±2℃ , 50±5%RH, 24h Drop Method, Cover, 60±1min	No more than a slight change in surface dulling, surface attack or staining	Rating 0:No change (See Table1) (see Note 3)
Resistance to heat	ASTM F1514-03(2013)	Specimen: 51mm×51mm, 3pcs Condition: 23±1 ℃ , 50±5%RH, 24h →70±1 ℃ , 7days→23±1 ℃ , 50±5%RH, 24h	Average ΔE*ab ≤ 8.0	Average ΔE*ab :0.09 (see Note 3)
Light stability	ASTM F1515-15 & ASTM D2244-16	Exposure cycle:Irradiance: 0.30W/(m2•nm)@340nm ,Continuous light at (63±2) ℃ BPT,(50±10) %RH Filter: Window Exposure period: 300h	Average ΔE*ab ≤ 8.0	Average ΔE*ab :1.1 (see note 4)
Appearance	ASTM F1700-13a Clause 7	Specimen: 914mm×152mm, 5pcs Condition:23±1 ℃ , 50±5%RH, 24h	The product shall be free of defects which adversely affect performance or appearance.	No visible defects
Binder content	ASTM F1700-13a Clause 6.1	The binder contant shall bedetermined by statement of formula	See Annex A	Client’s statement See Annex A

Contact us for more pattern